Date codes printed in ordinary dye ink disappear on dark film, black bottles, and dark cable jackets. The dye stains the surface, and a dark background swallows the stain. The standard fix is white pigment ink: a continuous inkjet process that deposits reflective pigment particles on top of the surface instead of soaking it. White ink behaves differently from dye ink, because the pigment settles whenever it stands still, so the printer has to keep it moving, filter it hard, and flush on schedule. This guide collects the five rules that separate a white ink line that runs quietly from one that blocks after every weekend.
Key takeaways:
White pigment ink is the standard answer for dark surfaces. Dark flexible film, dark bottles, painted glass, plastic cable jackets, dark cartons, and extruded profiles all call for it.
Pigment settles, so the system must agitate. A production white ink coder carries an independent agitation cylinder and multi stage filtration, not occasional stirring by hand.
The nozzle is the sensitive part. A 60 micron gem orifice with thermostatic control survives only when filtration upstream of it does its job.
Print distance still decides quality. The working range spans 2 to 30 mm, with the sharpest code near 10 mm.
Adhesion is surface specific. Request a marked sample on your exact material, then test it the way your supply chain treats it.
A dye ink works by staining the material. On white film the stain contrasts against the background, but on a dark surface the stain and the background read almost the same, and the code fades for the scanner and the shopper at the same time. Pigment ink works differently: it carries solid white particles that sit on the surface and scatter light, so the code stays light against a dark background.
The surfaces that push buyers toward white ink follow a pattern. Dark flexible film for frozen and chilled food, black or dark glass bottles for sauces and beverages, painted and colored glass, plastic cable jackets where the print must survive flexing, dark carton board, and dark extruded profiles. On all of them, a white or yellow pigment ink is the working answer, and dye ink is the wrong tool.
The trade is management. Pigment ink is a suspension, not a solution, and everything in the ink system has to be built around that fact.
Pigment particles are heavier than the fluid carrying them, and a fluid that stands still lets them settle. A white ink system that sits idle develops weak, washed out codes first, then blockages in the narrowest channels. The difference between a system designed for pigment and one adapted to it is usually visible in the first week of production.
Production white ink coders carry an independent agitation cylinder that stirs the ink continuously, and their ink circuits keep circulating between print runs. When you compare systems, ask two questions: does the agitation run automatically whenever the machine is on, and what does the system require after a longer shutdown. An honest supplier will tell you the shutdown procedure matters more for white ink than for dye ink, because pigment that has fully settled needs a proper restart, not just a print command.
Consumption behavior belongs in the same conversation. A production system monitors ink condition and doses make-up fluid only when viscosity drifts, which trims additive consumption by as much as half compared with fixed-schedule dosing, and it reports fluid levels so a refill is planned work rather than a mid shift surprise. On white ink systems this monitoring matters twice over, because pigment ink and its additives are a matched pair, and dosing by guesswork changes viscosity and pigment concentration at the same time.

A production white ink coder: full keyboard controller, stainless cabinet, and a small print head on an umbilical for tight conveyor positions.
The print head orifice in a small character inkjet coder is a 60 micron gem nozzle with thermostatic control, and it is the precision component of the machine and the least forgiving one. Pigment ink is exactly the fluid you do not want reaching it unfiltered, so the ink path between reservoir and head carries multi stage filtration, and the filters are consumables you plan for, not accessories you discover later.
| Ink system component | What it does | Why white ink needs it |
|---|---|---|
| Independent agitation cylinder | Stirs pigment continuously | Standing pigment settles and clogs |
| Multi stage filtration | Removes particles before the head | Protects the 60 micron gem orifice |
| Sealed refill bags | Keep contamination out during refill | An open bottle lets debris into the ink path |
| Automatic flush at start and stop | Clears the head path on every cycle | Blockages form fastest in a still head |
If any of these appear as options rather than standard equipment on a system you are quoted for pigment work, price them into the comparison before deciding.
The ink bottle settles just like the machine does. Buy pigment ink in quantities the line will actually consume, rotate stock so nothing ages past the supplier shelf life, and store it within the temperature range printed on the datasheet rather than against a hot wall or in a cold corner. Before a refill, gently roll the sealed container rather than shaking it hard, because violent shaking drives air into the fluid, and air is the enemy of a clean print. Refill practice is the other half: sealed refill bags keep debris out of the ink path during the refill itself, and decanting through open funnels reintroduces exactly the contamination the filtration chain is paid to remove. Keep ink, solvent and make-up fluid from one supplier system, because a pigment circuit is formulated as a set, and mixing brands inside it is how a reliable machine becomes a warranty dispute.
White ink does not change the geometry rules of small character inkjet. The print head works across a print distance of 2 to 30 mm, and the sharpest code sits near 10 mm, so the mounting has to hold that gap on the real line: measure at the marking point with the package at speed, include package bounce, and use a rigid bracket rather than a flexible one. The head itself is small enough to mount in tight conveyor positions, which is usually the easier half of the job. What fails quietly is the bracket that lets the gap drift a few millimeters over weeks, because the code fades gradually and everyone blames the ink first.
Curved dark surfaces get one more rule. On bottles, tubes and other rounded dark items, printing straight on puts the nozzle at a varying distance as the surface curves away, so production heads for curved work carry a nozzle with a 30 degree bevel that prints around the shoulder of the part instead of square into it. If your dark parts are round rather than flat, say so in the first conversation, because it changes the head specification, not just the bracket.
Dark surfaces differ from each other as much as they differ from white film, and adhesion follows the surface, not the color.
| Surface | What to watch in the test |
|---|---|
| Dark flexible film | Cold and condensation at the filler, flexing of the bag |
| Dark glass bottles | Smooth surface grip, abrasion in conveying |
| Painted or colored glass | Solvent effect on the paint layer |
| Plastic cable jacket | Repeated flexing after marking |
| Dark carton board | Dust and loose fibers reducing contact |
The protocol costs one courier shipment. Send samples of the real material, ask for codes marked at production speed in the proposed ink, then treat the returned samples the way your supply chain treats them: chill them, flex them, abrade them lightly, and read them a day later. A supplier who will not run this test before you order is saving you from the wrong purchase.
Collected from the specification level that production pigment work expects:
| Capability | Typical production level |
|---|---|
| Ink handling | Pigment based white ink, independent agitation cylinder |
| Filtration | Multi stage, upstream of the print head |
| Nozzle | 60 micron gem orifice, thermostatic control |
| Cleaning | Automatic flush cycles at start up and shut down |
| Line speed | Character quality held up to about 7.5 m/s |
| Print distance | 2 to 30 mm, sharpest near 10 mm |
| Character height | 1 to 12 mm |
| Construction | IP65 full stainless for washdown areas |
The stainless construction line matters more than it looks: dark surface coding clusters in food, beverage and cable plants, and those are exactly the environments that hose down daily. The wider inkjet printing machine range splits this work between small character coders for the dark pack itself and high resolution machines for the shipping case.
Dark flexible film, dark glass and plastic bottles, painted or colored glass, plastic cable jackets, dark carton board, and dark extruded profiles. The working test is simple: if a dye based code is hard to read against the background, the surface needs pigment ink.
Pigment settles when it stands, so a system without continuous agitation and multi stage filtration will give you blocked nozzles that a dye system does not. A system built for pigment, with an independent agitation cylinder and automatic flushing, holds the ink in condition and behaves in service much closer to dye ink than the reputation suggests.
Codes on the outside of sealed packaging are food adjacent rather than food contact, but requirements tighten near contact zones such as lids and liners. Ask your supplier for a written suitability statement for your exact application, and request the paperwork for the white pigment ink specifically, since dark food packaging is where many food plants end up needing it.
Painted and colored glass are standard applications for pigment ink. The surface is smooth and the code relies on grip rather than absorption, so include abrasion testing in your sample run, and for painted glass confirm the ink works against the paint layer rather than bare glass.
Automatic flush cycles at start up and shut down handle the daily cleaning. Beyond that, follow the manufacturer schedule for filter changes, keep sealed refill bags sealed until use, and treat any longer shutdown with the documented restart procedure rather than a cold print command.
White ink rewards preparation. Send samples of your dark film, bottles, or cable, state the line speed and the environment, and ask for marked samples plus the ink suitability paperwork in return. The team at NANO MARK runs these tests on real material before any purchase decision, and one marked sample answers more than a week of specification reading. Start the conversation on the contact page.
Contact: Jason
Phone: +8613337336942
E-mail: [email protected]
Add: Hangzhou City, Zhejiang Province, China